Optimization of electrochemical spark machining process by using taguchi method

Authors

  • Dileep Kumar B P1, Jagannatha N2, Sathisha N3, Madhu Kumar K4 Department of Mechanical Engineering,Sir M.V.I.T, Bengaluru, Karnataka, India

Abstract

Electrochemical Spark Machining (ECSM) process is an emerging potential technology used for machining conducting as well as non-conducting materials. In this paper an attempt has made to optimize the process parameter using Taguchi method. Experiments are conducted according to Taguchi orthogonal array L27 to groove on Borosilicate glass material. The effect of process factors like Concentration of Electrolyte, Voltage and Standoff distance on Material Removal Rate (MRR) is discussed. The significance factor which will impact on MRR is determined by using Analysis of Variance (ANOVA). Keywords:Electrochemical Spark Machining (ECSM), Taguchi Method, MRR, ANOVA

Downloads

Published

2015-08-30

How to Cite

Sathisha N3, Madhu Kumar K4, D. K. B. P. J. N. (2015). Optimization of electrochemical spark machining process by using taguchi method. International Journal of Engineering Technology and Computer Research, 3(4). Retrieved from https://ijetcr.org/index.php/ijetcr/article/view/231

Issue

Vol. 3 No. 4 (2015)

Section

Articles

License

Creative Commons LicenseInternational Journal of Engineering Technology and Computer Research (IJETCR) by Articles is licensed under a Creative Commons Attribution 4.0 International License.